All settings of the charger can be configured with the VictronConnect app.

The Blue Smart IP65 Charger can be used on devices in your workshop and on motor vehicles, such as cars, motorbikes, yachts, boats, tractors and camper-vans.

The charger comes with both crocodile clips and M8 eyelets, making it easy for you to connect to the battery.

This quality Victron Energy product also comes with 5-Years Warranty so you can absolutely count on the quality and reliability.

• Water, dust and chemical resistant
• Seven step smart charge algorithm
• Recovery of fully discharged “dead” batteries
• Automatic power supply function
• Severe cold performance: down to -30°C
• Several other battery life enhancing features
• Low power mode to charge smaller batteries
• Li-ion battery mode
• Ultra high efficiency ‘green’ battery charger

With up to 95% efficiency, these chargers generate up to four times less heat when compared to the industry standard. And once the battery is fully charged, power consumption reduces to 0.5 Watt, some five to ten times better than the industry standard.

• Durable, safe and silent
• Low thermal stress on the electronic components.
• Protection against ingress of dust, water and chemicals.
• Protection against overheating: the output current will reduce as temperature increases up to 60°C, but the charger will not fail.
• The chargers are totally silent: no cooling fan or any other moving parts.

Reconditioning

A lead-acid battery that has been insufficiently charged or has been left discharged during days or weeks will deteriorate due to sulfation. If caught in time, sulfation can sometimes be partially reversed by charging the battery with low current up to a higher voltage.

Recovery function for fully discharged batteries

Most reverse polarity protected chargers will notr ecognize, and therefore not recharge a battery which has been discharged to zero or nearly zero Volts. The Blue Smart IP65Charger however will attempt to recharge a fully discharged battery with low current and resume normal charging once sufficient voltage has developed across the battery terminals.

Specifications

Input voltage: 230 VAC

Efficiency: 94%

Standby Power Consumption: 0.5W

Minimum Battery Voltage: Starts charging from down to 0V

Charge voltage ‘absorption’:

Normal: 14.4V

High: 14.7V

Li-ion: 14.2V

Charge voltage ‘float’:

Normal: 13.8V

High: 13.8V

Li-ion: 13.5V

Charge voltage ‘storage’:

Normal: 13.2V

High: 13.2V

Li-ion: 13.5V

Charge current, normal mode: 5A

Low current mode: 2A

Temperature compensation (lead-acid batteries only): 16 mV/°C

Can be used as Power Supply: Yes

Back current drain: 0.7 Ah/month (1 mA)